Serving Como (St. Paul), St. Paul, Minneapolis

Mold removal in Como (St. Paul), St. Paul

Certified mold removal in Como (St. Paul), St. Paul. Free on-site inspection, IICRC certified crews, insurance-documented, 24/7 emergency response.

24/7 emergency response
IICRC certified team
Licensed & fully insured
5-star local reviews

Call Now: (612) 555-0142 Get Free Inspection →

IICRC Certified

Licensed & Insured

24/7 Emergency Service

Free Inspection

Como (St. Paul), St. Paul, Minneapolis

Spring melt sits heavy in the Como Park area, especially where wet clay near Como Lake keeps water pressed against old basement walls. If your 1900-1930 bungalow or four-square near Lexington Parkway, Wheelock Parkway, or Como Avenue smells damp after thaw, the problem may be more than a wet floor.

Mold removal in Como (St. Paul), St. Paul often means tracing water through limestone, block, old mortar joints, porch framing, and patched basement finishes. You need the mold taken out, but you also need the moisture path found so it does not grow back behind trim, under subflooring, or inside stored boxes.

Basement seepage after the snow lets go

Como basements often take water from the side, not just from the floor. The clay around Como Lake drains slowly, so spring melt and long March rains can keep pressure on foundation walls for days. In older homes near Hamline Avenue or Victoria Street, you may see staining along the cove joint, flaking paint on block, or dark growth behind shelving.

A proper mold removal job starts by opening what needs to be opened, not tearing apart the whole basement by guesswork. You check the bottom of finished walls, the backside of paneling, tack strips, rim joists, and stored cardboard. Porous materials with growth usually come out. Framing can often be cleaned when it is sound and dry enough.

You also need the seepage source addressed. That may mean downspout extensions, grading corrections, sump discharge review, or finding cracks hidden behind old laundry rooms. If the wall stays wet, the mold comes back.

Old bungalows hide moisture in tight framing bays

Many Como (St. Paul) houses were built before modern air sealing. A 1920s four-square may have balloon framing, plaster walls, plank subfloor, and a basement stairwell that pulls damp air upward. When summer dew points climb after storms over Como Park, that damp air can condense on cooler surfaces in closets, north walls, and rim joist pockets.

You may notice a musty smell before you see spots. That is common in houses with layers of past repairs: paneling over plaster, carpet over old tile, or a finished basement wall built tight to stone or block. Mold can sit behind those layers while the room looks mostly normal.

The work should separate staining from active growth, then remove contaminated material without spreading dust through the house. Negative air, containment, HEPA vacuuming, and damp wiping matter in these older layouts. So does checking moisture levels before closing the wall again.

Three-season porches with mold under the floor

Unheated porches are a common trouble spot around Como Avenue, Horton Avenue, and streets close to the park. Snow blows against porch skirts in winter, then spring melt sits under the floor. In summer, humid air moves through the open framing. If the porch has older tongue-and-groove flooring or an enclosed skirt with poor airflow, the subfloor can grow mold while the walking surface still looks fine.

You may first smell it when you open the interior door after a rain. Sometimes you see cupping boards, soft spots, or dark edges near the threshold. The concern is not only the porch. Air can pull from that cavity into the house, especially when a bath fan, dryer, or chimney creates negative pressure.

Cleaning this area means getting access from below or through selective floor removal. The subfloor, joists, and sill area need inspection. Damaged wood may need replacement, while sound framing can be cleaned and dried. Venting and drainage around the porch have to be corrected too.

Services

Mold problems we solve in Minneapolis

From a single moldy bathroom wall to whole-basement remediation, every job handled by certified, insured technicians.

Mold Inspection & Testing

Air and surface testing with certified lab analysis.

Learn more about Mold Inspection & Testing

Mold Removal & Remediation

Full containment, removal, and HEPA air scrubbing.

Learn more about Mold Removal & Remediation

Black Mold Removal

Safe removal of toxic Stachybotrys (black mold).

Learn more about Black Mold Removal

Basement Mold Removal

The #1 mold problem in Minneapolis homes, solved.

Learn more about Basement Mold Removal

Attic Mold Removal

Roof leak and ventilation mold treated and sealed.

Learn more about Attic Mold Removal

Real Minneapolis Jobs

Before & after

Local homes, real results. Every job documented with photos, lab reports, and clearance testing.

Basement drywall, South Minneapolis
Heavy mold removed and surface restored after spring flooding.

Attic sheathing, Edina
Ventilation issue corrected, sheathing treated and sealed.

5-Star Reviews

Trusted across the Twin Cities

4.9from 380+ local homeowners

"Called at 9 PM after finding black mold in our basement. They were here the next morning, walked us through everything, and the air smelled fresh again within days."

"Honest pricing and no scare tactics. Other companies wanted $8k, these guys did the job properly for less than half that and showed me the lab results."

"We had attic mold from an old roof leak. The team handled insurance paperwork and the workmanship warranty gave us real peace of mind selling the house."

Service Area

Serving Minneapolis & the Twin Cities Metro

Locally owned. Same-day response across the metro, no out-of-state subcontractors, ever.

FAQ

Common questions, straight answers

Why does my Como basement smell musty every spring?+

Spring melt loads the clay soil around Como Lake and keeps moisture against older foundations. Water can seep through block, limestone, mortar joints, or the floor-wall seam. Once cardboard, carpet, or drywall gets damp, mold can grow even after the floor looks dry.

Can mold under a three-season porch get into the house?+

Yes. Air often moves from porch cavities into the main house through gaps at the threshold, rim joist, or old floor framing. If the porch subfloor has mold, odors and spores can be pulled indoors when fans, dryers, or a furnace create pressure changes.

Do I have to remove all the basement walls to handle mold?+

Not always. The first step is finding where moisture and growth are present, then opening targeted areas. Materials like moldy drywall, insulation, and carpet usually need removal, while solid framing may be cleaned if it is structurally sound and can be dried.

Is mold removal different in a 1920s St. Paul bungalow?+

It can be. Older Como homes may have plaster, plank subfloors, balloon framing, and patched foundations that hide moisture paths. Work has to account for those assemblies so cleaning does not spread dust and the same damp cavity is not closed back up.

We work the whole Twin Cities metro. Wherever you are, the job usually starts with a mold inspection and moves into removal and remediation. Curious about price? See Minneapolis mold removal cost. City-side, try a neighborhood page like Nokomis. Or a specialty scope like attic mold from a roof leak.

Browse the site

Everything we cover for Minneapolis homeowners

Pricing by job type, neighborhood-specific pages, and specialty scopes. Pick what looks like your situation.

Pricing

2026 Minneapolis mold pricing guides

Neighborhoods

Minneapolis neighborhood mold removal

Specialty jobs

Specialty mold services in Minneapolis

Mold won't wait. Neither do we.

Call now for a free inspection. A certified Minneapolis technician will be at your door, often the same day.

(612) 555-0142 Request a quote