"Called at 9 PM after finding black mold in our basement. They were here the next morning, walked us through everything, and the air smelled fresh again within days."
mold removal pricing
Mold removal cost in Minneapolis
What mold removal actually costs in Minneapolis: real 2026 price ranges by job size, what drives the number, and how to avoid overpaying.
- 24/7 emergency response
- IICRC certified team
- Licensed & fully insured
- 5-star local reviews
IICRC Certified
Licensed & Insured
24/7 Emergency Service
Free Inspection
A real 2026 price for mold removal in Minneapolis starts with how much has to be isolated, opened, cleaned, hauled out, and tested. A small closet with surface mold may land under $2,500. A finished basement near Lake Nokomis, Northeast, or Longfellow can run much higher once wet drywall, furring strips, carpet, and stored contents are involved.
For mold removal cost minneapolis searches, the useful range is about $900 to $55,000 or more. That wide spread is not guesswork. Six items move the number: affected square footage, containment, tear-out, HVAC, disposal, and third-party clearance testing.
2026 Minneapolis price ranges by job size
A small job, like a 10 to 30 square foot closet, pantry, or bath wall, often costs $900 to $2,200 in Minneapolis. That assumes one containment area, HEPA air scrubbing, surface cleaning, and no major tear-out. If plaster, tile backer, or built-in shelving has to come out, the same room can move closer to $3,000.
A full basement is a different job. In a 1920s to 1950s Minneapolis home with a block foundation, finished walls, old paneling, or carpet over slab, expect about $6,500 to $18,000. Water intrusion at the floor line, mold behind drywall, and contents handling add labor fast.
Whole-home mold work usually starts around $18,000 and can pass $55,000 when multiple floors, attic sheathing, wall cavities, and HVAC returns are involved. National averages are often lower, about $10 to $30 per affected square foot, while Minneapolis jobs often sit around $15 to $45 because older basements and winter containment add time.
The six items that actually move the price
Affected square footage is the first price driver, but it is not the only one. A clean 40 square feet on painted block is cheaper than 40 square feet behind drywall, baseboard, and insulation. Access matters too. A tight basement stair off a South Minneapolis bungalow takes longer than an open walkout.
Containment complexity is next. One 6 mil poly barrier with negative air is one price. Two rooms, a stairwell, and a shared return duct need more plastic, tape, zipper doors, air machines, and labor checks. Tear-out versus treat-in-place also changes the number. Mold on framing may be cleaned and sealed after sanding. Moldy drywall, carpet pad, wet insulation, and swollen MDF trim usually need removal.
HVAC involvement adds cost when returns, supply trunks, or a furnace closet are contaminated. Disposal is another line item because bagged debris, carpet, and damaged contents take truck space and dump fees. Post-clearance testing, often $350 to $900 from a third party, confirms the work before rebuild.
Why the cheapest quote can cost more later
A low quote often leaves out the parts homeowners do not see. If a contractor plans to spray visible mold without containment, negative air, HEPA vacuuming, and controlled tear-out, the price is low because the scope is thin. That can spread spores into clean rooms, especially in homes with open stairways or a central return near the basement ceiling.
Ask what is included before you compare prices. The quote should name the rooms, estimated square footage, containment layout, number of air scrubbers, materials to remove, disposal method, and whether clearance testing is third-party. A line that says “mold treatment” with one lump sum is not enough for a finished basement or whole-home job.
Clearance matters when insurance, a buyer, or a rebuild contractor is involved. The remediation company should not grade its own work. Independent air or surface samples give you a clean stopping point before new drywall, flooring, or cabinets cover the area.
Our Process
How we remove mold safely, in 4 steps
No guesswork. No upsells. A clear, certified process from first call to final clearance test.
1. Call or Request Quote
Tell us what you're seeing. We respond in 15 minutes or less, 24/7.
2. Free On-Site Inspection
A certified technician inspects, tests, and identifies the source.
3. Containment & Removal
We seal off the area, remove contaminated materials, and HEPA scrub the air.
4. Clearance & Warranty
Final air test confirms safe air quality. Workmanship warranty included.
Real Minneapolis Jobs
Before & after
Local homes, real results. Every job documented with photos, lab reports, and clearance testing.
Basement drywall, South Minneapolis
Heavy mold removed and surface restored after spring flooding.
Attic sheathing, Edina
Ventilation issue corrected, sheathing treated and sealed.
5-Star Reviews
Trusted across the Twin Cities
4.9from 380+ local homeowners
"Honest pricing and no scare tactics. Other companies wanted $8k, these guys did the job properly for less than half that and showed me the lab results."
"We had attic mold from an old roof leak. The team handled insurance paperwork and the workmanship warranty gave us real peace of mind selling the house."
Service Area
Serving Minneapolis & the Twin Cities Metro
Locally owned. Same-day response across the metro, no out-of-state subcontractors, ever.
FAQ
Common questions, straight answers
How much does mold removal cost in Minneapolis for a small closet?+
Most small closet jobs run about $900 to $2,200 in 2026. That price fits a limited area, usually 10 to 30 square feet, with one containment zone and no major demolition. Built-in shelves, plaster repair, or mold behind baseboards can raise the cost.
What should I expect to pay for mold removal in a Minneapolis basement?+
A finished basement often costs $6,500 to $18,000, depending on how much drywall, carpet, paneling, and insulation has to come out. Older block foundations in Minneapolis can hide moisture at the floor line. If the mold reaches framing or stored contents, labor and disposal go up.
Is Minneapolis mold removal more expensive than the national average?+
It can be. National pricing often lands around $10 to $30 per affected square foot, while many Minneapolis jobs run closer to $15 to $45. Older basements, winter work, tighter access, and more containment can add time.
Should I take the lowest mold removal quote?+
Only if the scope includes containment, negative air, HEPA cleaning, disposal, and third-party clearance when needed. A cheap quote that only says “spray and treat” may skip the work that keeps spores from moving through the house. For a basement or whole-home job, that risk is not worth the short-term savings.
Not sure where to start? Most homeowners book a mold inspection first, then move into full mold remediation once we know the scope. Want prices first? See Minneapolis mold removal cost. Specialty scopes like crawl space mold removal are common in older homes. Neighborhood pages like East Richfield, Richfield mold removal walk through what we see block by block. Suburb work starts with Minneapolis homeowners.
Browse the site
Everything we cover for Minneapolis homeowners
Pricing by job type, neighborhood-specific pages, and specialty scopes. Pick what looks like your situation.
Pricing
2026 Minneapolis mold pricing guides
Neighborhoods
Minneapolis neighborhood mold removal
- Nokomis
- Northeast Minneapolis
- Powderhorn
- Linden Hills
- Camden
- Uptown
- Kenwood
- Longfellow
- Whittier
- Loring Park
- Marcy-Holmes
- Como
- Prospect Park
- Seward
- Cedar-Riverside
- Bryn Mawr
- Fulton
- Kingfield
- Standish-Ericsson
- Windom
- Highland Park, St. Paul
- Mac-Groveland, St. Paul
- Como (St. Paul), St. Paul
- Morningside, Edina
- Country Club, Edina
- Cahill, Edina
- Elmwood, St. Louis Park
- Fern Hill, St. Louis Park
- Browndale, St. Louis Park
- East Richfield, Richfield
- West Richfield, Richfield
- Central Richfield, Richfield
- East Bloomington, Bloomington
- West Bloomington, Bloomington
- Oxboro, Bloomington
- The Preserve, Eden Prairie
- Hidden Ponds, Eden Prairie
- Bearpath, Eden Prairie
- Glen Lake, Minnetonka
- Groveland, Minnetonka
- Burwell, Minnetonka
- Bass Lake, Plymouth
- Parkers Lake, Plymouth
- Medicine Lake, Plymouth
- Arbor Lakes, Maple Grove
- Rush Creek, Maple Grove
- Weaver Lake, Maple Grove
- Cedar Grove, Eagan
- Lexington-Diffley, Eagan
- Central Park, Eagan
- Heart of the City, Burnsville
- Sunset Pond, Burnsville
- Southcross, Burnsville
- Powers Lake, Woodbury
- Wedgewood, Woodbury
- Stonemill Farms, Woodbury
- Central Park, Roseville
- Owasso, Roseville
- Langton Lake, Roseville
Specialty jobs
Specialty mold services in Minneapolis
Mold won't wait. Neither do we.
Call now for a free inspection. A certified Minneapolis technician will be at your door, often the same day.