"Called at 9 PM after finding black mold in our basement. They were here the next morning, walked us through everything, and the air smelled fresh again within days."

Mold removal in Country Club, Edina
Certified mold removal in Country Club, Edina. Free on-site inspection, IICRC certified crews, insurance-documented, 24/7 emergency response.
- 24/7 emergency response
- IICRC certified team
- Licensed & fully insured
- 5-star local reviews
After a February warm-up, meltwater can back up under slate at dormers and valleys along Wooddale Avenue and Arden Avenue. In Country Club, those 1920s Tudors and English cottages often hide attic mold behind low kneewalls, old insulation, and rooflines that were never simple to vent.
You may also see stains near plaster ceilings, built-ins, or outside corners after a hard freeze followed by wet snow. Mold removal Country Club Edina work has to account for old plaster, finished wood, slate roofs, and the need to keep the job quiet and controlled.
Ice dams collect where Tudor rooflines come together
Country Club roofs are not plain rectangles. Gables, dormers, clipped eaves, slate, and copper details create cold spots where snow sits after storms off Lake Harriet and Minnehaha Creek. When heat leaks from the attic, the lower roof edge refreezes. Water then backs up under the slate or flashing and wets roof decking, rafters, and the back side of plaster ceilings.
You may not smell anything in the living space. The first clue can be dark sheathing above a north-facing bedroom, matted insulation near a valley, or rusted nails in a tight attic bay. We check the attic in sections instead of guessing from the hatch. That matters in these homes because one dormer can be clean while the next bay has years of staining.
Removal is done with containment, HEPA air control, and surface cleaning suited to old wood. The goal is to remove mold growth without disturbing slate, trim, or plaster that does not need to be opened.
Plaster walls need a lighter hand than drywall
Many Country Club Edina homes still have original plaster over wood lath or early gypsum lath. When a bathroom fan dumps into a wall pocket, a radiator line sweats, or a window leaks during wind-driven rain, the mold may be on the back of the plaster or inside the cavity. Homeowners often hesitate to touch it because a small crack can turn into a larger repair.
That caution is reasonable. Plaster behaves differently than drywall. It can stay solid even when the paint is stained, or it can delaminate behind a surface that looks fine. We look for the source first: failed glazing around steel casements, hairline cracks near brick or stucco, old supply lines, and cold corners above uninsulated rim joists.
If the plaster can be saved, we clean and treat exposed framing or surfaces without tearing out more than needed. If removal is needed, cuts are planned around trim, built-ins, and wall lines so repairs are easier to blend back into the room.
Quiet containment for older high-value homes
A mold job in the Country Club district is not just about scrubbing a surface. You may have hardwood floors, original stair rails, coved plaster, tile baths, and finished rooms below the work area. Before equipment is set, traffic paths need protection and the work zone needs to be sealed from the rest of the house.
Older foundations add another layer. Some homes have poured concrete, some have block, and some have old drain systems that do not handle spring thaw well. After a wet March or a heavy June storm, moisture can push through basement walls near Sunnyside Road, Bruce Avenue, or Country Club Road. That can feed mold behind storage, paneling, or finished basement walls.
Discreet work means keeping the project orderly, not turning the house into a spectacle. We use contained work areas, HEPA filtration, careful debris handling, and clear documentation. You know what was removed, what was cleaned, and what moisture problem still needs correction.
Mold problems we solve in Minneapolis
From a single moldy bathroom wall to whole-basement remediation, every job handled by certified, insured technicians.
Mold Inspection & Testing
Air and surface testing with certified lab analysis.
Mold Removal & Remediation
Full containment, removal, and HEPA air scrubbing.
Black Mold Removal
Safe removal of toxic Stachybotrys (black mold).
Basement Mold Removal
The #1 mold problem in Minneapolis homes, solved.
Attic Mold Removal
Roof leak and ventilation mold treated and sealed.
Before & after
Local homes, real results. Every job documented with photos, lab reports, and clearance testing.


Trusted across the Twin Cities
"Honest pricing and no scare tactics. Other companies wanted $8k, these guys did the job properly for less than half that and showed me the lab results."
"We had attic mold from an old roof leak. The team handled insurance paperwork and the workmanship warranty gave us real peace of mind selling the house."
Serving Minneapolis & the Twin Cities Metro
Locally owned. Same-day response across the metro, no out-of-state subcontractors, ever.
Common questions, straight answers
Why do Country Club Edina homes get attic mold after ice dams?+
The rooflines are often complex, with dormers, valleys, and slate that holds snow. Heat escaping from old attic bypasses melts the snow, then it refreezes at the eaves. That trapped water can wet roof decking and insulation long before you see a ceiling stain.
Can mold on old plaster be cleaned without tearing out the whole wall?+
Sometimes, yes. If the plaster is sound and the growth is on the surface, controlled cleaning may be enough. If mold is growing on the back side or the lath is wet, a limited opening may be needed so the hidden material can be removed or dried correctly.
Do you have to remove slate roofing to fix attic mold?+
Not usually for mold removal itself. The attic side can often be cleaned from inside with containment and HEPA equipment. If there is an active roof leak or ice-dam damage, a roofing contractor may need to address the slate, flashing, or ventilation issue separately.
How discreet can mold removal be in Country Club Edina?+
The work can be planned to limit disruption, protect finishes, and keep equipment contained to the affected area. You still need proper safety controls, but the project does not need to spread through the whole house. Documentation can be kept clear and factual for your records.
We work the whole Twin Cities metro. Wherever you are, the job usually starts with a mold inspection and moves into removal and remediation. Curious about price? See Minneapolis mold removal cost. City-side, try a neighborhood page like Nokomis. Or a specialty scope like attic mold from a roof leak.
Everything we cover for Minneapolis homeowners
Pricing by job type, neighborhood-specific pages, and specialty scopes. Pick what looks like your situation.
2026 Minneapolis mold pricing guides
Minneapolis neighborhood mold removal
- Nokomis
- Northeast Minneapolis
- Powderhorn
- Linden Hills
- Camden
- Uptown
- Kenwood
- Longfellow
- Whittier
- Loring Park
- Marcy-Holmes
- Como
- Prospect Park
- Seward
- Cedar-Riverside
- Bryn Mawr
- Fulton
- Kingfield
- Standish-Ericsson
- Windom
- Highland Park, St. Paul
- Mac-Groveland, St. Paul
- Como (St. Paul), St. Paul
- Morningside, Edina
- Cahill, Edina
- Elmwood, St. Louis Park
- Fern Hill, St. Louis Park
- Browndale, St. Louis Park
- East Richfield, Richfield
- West Richfield, Richfield
- Central Richfield, Richfield
- East Bloomington, Bloomington
- West Bloomington, Bloomington
- Oxboro, Bloomington
- The Preserve, Eden Prairie
- Hidden Ponds, Eden Prairie
- Bearpath, Eden Prairie
- Glen Lake, Minnetonka
- Groveland, Minnetonka
- Burwell, Minnetonka
- Bass Lake, Plymouth
- Parkers Lake, Plymouth
- Medicine Lake, Plymouth
- Arbor Lakes, Maple Grove
- Rush Creek, Maple Grove
- Weaver Lake, Maple Grove
- Cedar Grove, Eagan
- Lexington-Diffley, Eagan
- Central Park, Eagan
- Heart of the City, Burnsville
- Sunset Pond, Burnsville
- Southcross, Burnsville
- Powers Lake, Woodbury
- Wedgewood, Woodbury
- Stonemill Farms, Woodbury
- Central Park, Roseville
- Owasso, Roseville
- Langton Lake, Roseville
Specialty mold services in Minneapolis
Mold won't wait. Neither do we.
Call now for a free inspection. A certified Minneapolis technician will be at your door, often the same day.